Electrical Panel Replacement & Upgrades in Rogersville, TN
Fuse boxes, Federal Pacific and Zinsco panels, full panels and 100-amp services that can't carry a heat pump: this is the work I do most in my own town.

Quick answer
Trent Electrical is a Rogersville electrician: the shop is here, and owner Ryan Trent personally replaces panels and upgrades services to 200 amps across town and the rest of Hawkins County. He's been licensed and insured in Tennessee since 2013. Call or text (423) 754-4353 any time, day or night.
Rogersville is where the shop is
Rogersville is home. My shop is here, and most weeks I'm working within a few miles of Main Street. When a panel question comes from Burem Road, Crockett Spring or a subdivision off Highway 66, it's a short trip, and I usually already know what that part of town was built with.
Being local also means I'm still around after the job. If you have a question about a breaker a year from now, you're calling the same person who installed it.
What I find inside Rogersville panels
The patterns here are pretty consistent after this many years of service calls. Downtown and on the older streets off Main, I find fuse panels that were converted to breakers at some point without anyone correcting the grounding, along with ungrounded two-prong receptacles and knob-and-tube remnants on the circuits the panel feeds.
In the 1970s and '80s subdivisions off Highway 66 and Highway 11W, the usual story is a 100-amp service that ran out of room the day a heat pump went in, sometimes with aluminum branch circuits that need the right devices and connections.
Out toward the county line, panels often feed long service drops and underground lines to shops and barns, so the panel decision includes those feeders too.
Federal Pacific, Zinsco and fuse boxes
I recommend replacing Federal Pacific Stab-Lok panels, Zinsco panels and screw-in fuse boxes rather than repairing them. Parts are hard to find, and that equipment doesn't give you the protection a modern panel does.
For any other panel, brand and age are only part of the picture. I look at the bus, the breakers, the connections, any heat damage or corrosion, and whether the panel can still be serviced safely. If a single failed breaker is the real problem, I'll tell you that.
New panel, or a full 200-amp service upgrade?
Those are two different jobs. A panel replacement swaps the box and breakers. A service upgrade can also include the meter base and the service entrance conductors coming into the house, and it means working with the utility on the disconnect and reconnect.
I start with a load calculation based on how your house actually runs: heat, cooking, water heater, dryer, well pump, plus anything you're planning such as an EV charger or shop. Not every Rogersville house needs 200 amps, and I won't sell you an upgrade your loads don't call for.
How a Rogersville panel job runs
From the first visit to the final label, here's the order of things:
- I generally start with a phone estimate. A detailed panel quote usually takes diagnosis and time. Many times there is no charge, but the length and detail matter; if a service fee applies, I often waive it if I win the job. Most work is done on the spot.
- I pull the electrical permit for the work.
- On a service upgrade, I coordinate the disconnect and reconnect with the utility.
- Circuits are moved over, tested and labeled so you know what every breaker does.
- The work gets the required Tennessee electrical inspection.
Timing and add-ons
Most straight panel swaps are done in a day, with power back on that evening. A service upgrade that changes the meter base or service entrance can take longer, depending on utility scheduling and the inspection.
With the panel already open, it's the easiest time to add a Type 2 whole-home surge protector. Rogersville storms and lightning coming in on the line are a real source of damage around here.
Who you're hiring
I'm Ryan Trent. I own Trent Electrical, I've served this area since 2013, and I do every job myself. Trent Electrical is licensed and insured. Call or text (423) 754-4353 24/7. Tell me what's going on and I'll confirm my earliest availability.
Rogersville panel questions
Is a 100-amp service big enough for my Rogersville house?
Sometimes. A load calculation answers it. Homes that added a heat pump, EV charger or shop often outgrow 100 amps, but plenty of homes don't need more.
My old fuse box still works. Do I have to replace it?
I recommend replacing fuse boxes. They don't give the protection a modern panel does, and many were converted or modified over the years without grounding being corrected.
Does a 200-amp upgrade include the meter base?
It can. Depending on what's there, a service upgrade may include the meter base and service entrance conductors as well as the panel. I'll tell you exactly what's included in the written quote.
What does it cost to have you look at my panel?
Estimates generally start by phone. Checking a panel for an exact quote usually takes diagnostic time. Many times there is no charge, depending on the length and detail. If there is a service fee, I often waive it if you hire me. Most of the time I do the work there and then.
Can surge protection go in at the same time?
Yes. A Type 2 surge protector mounts at the panel, so a panel replacement is the simplest time to add one.
Talk to Ryan about your Rogersville panel
Call or text 24/7 for calls and emergencies. I'll confirm my earliest availability.
