Electrical Repairs, Outlets & Dedicated Circuits

Trent Electrical provides residential electrical repairs, outlet and switch replacement, GFCI and AFCI corrections, wiring repairs and new dedicated circuits throughout Rogersville, Hawkins County and the surrounding East Tennessee communities. Every job is diagnosed, explained and completed personally by licensed electrician Ryan Trent.

Call Ryan Text Ryan Request Service

USB outlet installed in a white shiplap wall by Trent Electrical

What's included

Outlets & Receptacles
Loose, broken, scorched or outdated receptacles replaced, including tamper-resistant, weather-resistant and USB outlets.
Switches & Dimmers
Worn switches, incompatible dimmers, loose connections, buzzing and intermittent operation corrected.
GFCI & AFCI Protection
GFCI receptacles and breakers, AFCI protection and combination devices installed or repaired after the cause of tripping is identified.
Dedicated Appliance Circuits
Properly planned circuits for household equipment when the existing wiring or load requires one.
Wiring & Code Corrections
Open grounds, reversed polarity, damaged conductors, improper splices, overloaded boxes and unsafe previous work corrected.
Smoke & CO Alarms
Hardwired and interconnected smoke and carbon-monoxide alarms installed or replaced, including battery-backup models.

A visible device problem can be limited to one worn part, or it can be the first sign of a connection, wiring, or load issue elsewhere on the circuit. Testing separates those possibilities before parts are changed.

Single-device repairs and grouped household updates are both welcome. The scope can cover outlets, switches, protective devices, alarms, unfinished wiring, or a dedicated appliance circuit, with the same electrician handling the diagnosis and repair.

If the symptom is unknown or keeps coming back, the dedicated electrical troubleshooting service is built for deeper diagnostics. If you already know the updates you want grouped together, this repair page is the right place to start.

Common reasons homeowners call

An outlet is warm, loose, cracked, discolored, or no longer holds a plug tightly.
A switch buzzes, feels loose, flickers lights, or only works part of the time.
A GFCI will not reset, or an AFCI breaker trips after a specific device is used.
A microwave, freezer, heater, sump pump, or other appliance may need its own circuit.
Old two-prong outlets, wiring defects, or expired smoke and carbon-monoxide alarms need evaluation.

Which service fits?

Choose electrical repairs for planned outlet, switch, device, alarm, and dedicated-circuit work. If the cause is unknown or the problem keeps moving around the house, start with troubleshooting. If the panel is full, damaged, or too small for the work, a panel upgrade may be the better first step.

Homeowner questions

Can you replace just one bad outlet or switch?

Yes. Small repair calls are normal. The circuit is still checked first so a loose connection, open ground, or overloaded box is not missed behind the device.

Why does my GFCI keep tripping after I reset it?

It can be a failing device, moisture, damaged wiring, a shared load, or a real ground fault. The safe approach is to test the circuit before replacing the GFCI.

Do I need a dedicated circuit for a new appliance?

It depends on the appliance, the manufacturer instructions, the existing circuit load, and the wiring already in place. Those details are checked before recommending a new run.

Can two-prong outlets be changed to three-prong outlets?

Sometimes, but not by simply swapping the face. The grounding path has to be verified, or another allowed protection method has to be used and labeled correctly.

Can several small repairs be handled in one visit?

Yes. Grouped outlet, switch, alarm, and circuit corrections are often easier to plan together because the home’s electrical use can be considered as a whole.

Helpful guide

Electrical Outlet, Switch, GFCI & Dedicated Circuit Repair Guide

Learn when a device replacement may be enough and when testing should look farther into the circuit.

Read the guide

How it works

Four steps. One licensed electrician.

01
Listen & inspect
Start with the symptom, the room, and what changed before opening devices or panels.
02
Test the circuit
Use meter readings and circuit checks to find whether the issue is the device, wiring, load, or protection.
03
Explain the options
Review what was found and choose the repair that fits the home’s wiring and actual use.
04
Repair, test & document
Complete the repair, verify operation, and note what changed for the homeowner’s records.