Hamblen County · TN

Licensed Residential Electrician in Morristown, TN

Trent Electrical is a licensed residential electrician serving Morristown, TN. Powering Homes with Integrity since 2013, with a 4.9-star rating from 211 Google reviews and owner-operated service.

35 min from Rogersville4.9 from 211 Google reviews
Genuine Trent Electrical project completed in East Tennessee

Residential electrical services in Morristown

  • Electrical Repair
    Dead circuits, tripping breakers and dimming lights traced to the cause with meters and a thermal camera.
  • Panel & Service Upgrades
    Full or outdated panels replaced, including the meter base and service entrance when the job needs them.
  • Whole-Home Surge Protection
    A surge device at the panel, explained honestly: what it protects and what it doesn't.
  • Wired Security Cameras
    Cat6 to each planned camera location, with viewing set up on a phone or compatible TV.
  • Shops & Outbuildings
    Feeders and grounding for detached garages, shops and barns on Hamblen County properties.
  • Inspection Repairs
    Electrical items from a buyer's or seller's inspection report worked through before closing.

Morristown is the Hamblen County seat, and it's a regular drive for me from my home base in Rogersville. Most of the work here is repair calls, panel upgrades, surge protection and wired camera systems.

I'm Ryan Trent, and I've run Trent Electrical since 2013. I do the diagnosis, the quote and the work myself.

Call or text (423) 754-4353 and tell me what's going on at your Morristown house.

Powering Homes with Integrity — serving Morristown homeowners since 2013.

Planning your electrical work

Assessment and options for your Morristown home

A Rogersville electrician who drives to Morristown

I'm Ryan Trent, and Trent Electrical is based in Rogersville, not Morristown. Morristown is the county seat of Hamblen County, and I make the drive down from Hawkins County on US-11W and the TN-66 area roads to work on homes here. I'd rather be upfront about that than pretend to have an office on Main Street.

What you get for that drive is the owner on the job. The person you talk to on the phone is the person who opens your panel, and the person who writes your quote is the person who does the work.

Morristown homes come in two broad groups: older houses closer to the middle of town that have been added onto over the years, and newer subdivisions built with modern panels but loaded up with more equipment than the builder planned for. The questions I ask are different for each, so tell me which one you have when you call.

Electrical repair in Morristown: tracing the actual fault

Most Morristown calls start with something going wrong: a breaker that won't stay on, a room that went dead, lights that dim when the heat pump starts, or an outlet that feels warm. My job is to find out why before anything gets replaced.

I test with meters and a thermal camera, work the circuit back to its source, and show you what I found. I generally give an estimate by phone. A detailed quote usually needs diagnostic time; many times there is no charge, but the length and detail matter. If a service fee applies, I often waive it when I win the job. Most of the time the work gets done on the spot. More detail is on the electrical troubleshooting and repair page.

  • In older in-town homes

    I look for splices from past additions, two-prong receptacles with no ground, and circuits carrying more than they were run for.

  • In newer subdivisions

    I look at worn or undersized breakers, crowded panels, and receptacle connections that loosen as they heat and cool.

  • When to stop and call

    A burning smell, buzzing at the panel, scorch marks or a shock from an appliance means quit using that circuit.

Electrical services I bring to Morristown homes

Past repair work, four services cover most of what Morristown homeowners ask me about.

  • Panel and service upgrades

    Replacing a full, outdated or Federal Pacific/Zinsco panel, and the meter base and service entrance when the upgrade needs them. See panel and electrical service upgrades.

  • Whole-home surge protection

    A surge device at the panel, with a straight explanation of what it can and can't stop. See whole-home surge protection.

  • Wired security cameras

    Cat6 runs to planned camera locations, with phone or compatible TV viewing confirmed during a walkthrough. See wired security camera installation.

  • Home inspection repairs

    Working through the electrical items on an inspection report before closing. See electrical safety inspections.

Hamblen County permits, shops and outbuildings

Because Morristown is in Hamblen County, permits and inspections follow Hamblen County requirements for the work involved. I'll tell you which steps apply to your job and handle them when the work calls for it.

Properties toward the edge of town often have a detached garage, shop or barn. Those buildings need their own feeder sizing and separate-structure grounding, so mention them when we talk.

If you're comparing nearby towns, the Hamblen County page lists the other communities I serve in the county.

Hamblen County service

Compare nearby towns, services, and homeowner guides across the county.

Explore electrical service across Hamblen County
Frequently asked in Morristown

Answers for Morristown homeowners

Practical answers about assessment, repairs and scheduling.

No. Trent Electrical is based in Rogersville in Hawkins County, and I drive to Morristown for jobs. When you call or text, I'll talk through the problem and let you know when I can get there.

It depends on what's there now. Some upgrades are just the panel. Others also need a new meter base or service entrance, especially when a home is moving from 60- or 100-amp service. I look at the existing equipment first and give you a written quote. Because Morristown is in Hamblen County, permits and inspections follow Hamblen County requirements for the work involved.

Yes. Send me the electrical part of the report and I'll go through each item at the house. If something on the report isn't actually a problem, I'll tell you that instead of charging you to change it.

Yes, wired camera systems. I plan the camera locations, run Cat6 to each one, and set up viewing on a phone, computer or compatible TV. The equipment and exact scope are confirmed during a walkthrough.

A breaker that trips is doing exactly what it's designed to do: cutting power before a wire gets hot enough to be a fire risk. The question is why it's tripping. If it's a 15-amp circuit feeding a microwave, a toaster, and a coffee maker at the same time, that's just an overloaded circuit and the fix is usually a dedicated 20-amp line. If it trips with almost nothing running, or trips instantly the moment you flip it, that points to a short or a failing breaker itself. We see a lot of both in the older kitchens around Morristown where a single circuit was never meant to carry modern countertop appliances. Don't keep resetting it more than once — call us and we'll trace it properly.

A warm cover plate almost always means a loose connection behind it, most commonly a back-stabbed receptacle where the wire is pushed into a spring clip instead of wrapped around a screw terminal. Over years of heating and cooling cycles, that clip loosens, resistance increases, and the connection heats up under load. It can also mean the receptacle is feeding more than it should, or that aluminum wiring is present, which reacts poorly with standard devices. Either way, a warm outlet is not something to wait on. We pull the device, inspect the wire for heat damage, and either re-terminate it properly on the screw or replace the receptacle outright. Most of these are same-day fixes once we're on site.

This is one of the most common calls we get from Morristown homes running on 100-amp service, especially the neighborhoods built in the 70s and 80s. A heat pump compressor draws a big surge of current the instant it starts, and if the service or the wire feeding it is undersized, that surge pulls voltage down everywhere else in the house for a second or two. A momentary dim on startup is fairly normal. A hard flicker, a buzz, or dimming that lasts several seconds is usually a sign the service itself needs more capacity, or that a connection somewhere between the meter and the panel has loosened. We measure voltage drop under load to tell the difference.
Browse all electrical questions

Have a different question about your Morristown home?

Call Ryan · (423) 754-4353
Hours
Open 24/7
Based In
Rogersville, Tennessee
Established
Serving East Tennessee Since 2013
Payment Options
Cash · Check · Credit Card

One call.
Lights back
on.

Text or call Ryan directly. Clear answers, honest pricing, no upsells.