Does every older home need a 200 amp panel?
No. The right size depends on the home’s actual loads, existing service equipment, and future plans. Capacity is checked before recommending a 150 amp, 200 amp, or other setup.
200 Amp Panel Upgrades.
Trent Electrical evaluates and replaces aging, damaged, crowded, or undersized electrical panels for homeowners across Rogersville, Hawkins County, and surrounding East Tennessee communities. Ryan sizes the work around the home's condition, present loads, and realistic future plans.
What's included
- 150 Amp and 200 Amp Service PanelsProperly sized breaker boxes for heat pumps, EV chargers, generators, well pumps, and shop equipment.
- Fuse Box ReplacementAging fuse equipment and obsolete or damaged breaker panels evaluated for practical repair or replacement options.
- Permitting and Inspections HandledPermit, inspection, and utility disconnect steps coordinated when they apply to the specific project.
- Whole Home Surge ProtectionType 2 whole house surge protective devices installed at the panel to protect appliances, HVAC, and electronics.
- Hand Labeled Circuit DirectoryEvery breaker traced and labeled by room and device so you never guess which breaker controls what.
- Generator and EV Charger ReadyPanels sized and configured for future generator interlocks, transfer switches, and Level 2 EV charging circuits.
A panel decision should be based on condition and use, not age or brand alone. Heat damage, corrosion, component availability, wiring condition, water entry, and current load all help define the right scope.
A replacement can improve serviceability, labeling, breaker availability, and room for carefully planned circuits, but the correct rating depends on a load review. Some homes are well served by their existing capacity; others need a larger plan for HVAC, cooking, well equipment, EV charging, generators, or outbuildings.
Trent Electrical is a licensed and insured Tennessee electrical contractor based in Rogersville. We handle the panel replacement process from start to finish. That includes the load calculation, permit coordination when required, meter disconnect planning with your utility provider, the panel and meter base work, grounding and bonding updates, and final inspection steps when they apply. The outage window is planned before work starts so you know what to expect.
"If I wouldn't run it in my own house, I won't run it in yours."
Common reasons homeowners call
- The home has aging fuse equipment or an older breaker panel that needs a condition and serviceability review.
- The breaker box is full, crowded, double-tapped, rusty, buzzing, warm, or missing clear labels.
- Breakers trip when normal loads run, or lights dim when HVAC, pumps, tools, or appliances start.
- A generator hookup, EV charger, heat pump, well pump, hot tub, shop, or kitchen remodel needs more capacity.
- An inspection, insurance request, or home purchase revealed panel defects that need documented correction.
Which service fits?
Choose a panel upgrade when the breaker box itself is outdated, damaged, full, or not suited for the loads you need. If the problem is one outlet or device, start with electrical repairs. If flickering, tripping, or heat has no clear cause, the circuit may need troubleshoot the circuitfirst.
Homeowner questions
Can the panel be upgraded without changing the meter base?
Sometimes. It depends on the meter base condition, service rating, utility requirements, grounding, and whether the service entrance equipment already matches the planned panel.
How long will the power be off during panel work?
The outage is coordinated around the utility disconnect, the panel work, and any required inspection. You’ll receive the expected sequence before the job is scheduled.
Will the new breakers be labeled?
Yes. Circuits are traced and labeled as clearly as practical so the next repair, inspection, or emergency shutoff does not start with guessing.
Should surge protection be added during a panel upgrade?
It is often worth discussing because the panel is already open, but it depends on your home, equipment, and storm exposure. The options can be compared without making it a pressure sale.
How it works
Four steps. One licensed electrician.
- 01
Site assessment
Walk the panel, meter, and loads. Confirm size, breaker type, and grounding gaps before quoting.
- 02
Utility coordination
Schedule the meter pull with your utility provider so your outage window stays tight.
- 03
Panel swap
Install the selected load center and breakers, complete terminations, and update the panel directory.
- 04
Final inspection
Hawkins County permit closed, photos on file, and a walk-through so you know every circuit.
Real Trent Electrical work
Related services
Often paired with this work
- Meter Base & Service Replacement
Storm-damaged meter bases and full residential service changes.
- Electrical Repairs, Outlets & Dedicated Circuits
Outlets, switches, GFCI/AFCI corrections, wiring repairs, and dedicated circuits.
- Electrical Troubleshooting & Repair
Tripping breakers, flickering lights, and hidden faults traced back to the real source.
- Whole-Home Surge Protection
Type 2 SPDs at the panel to protect HVAC boards, appliances, and electronics.
Serving these towns
Where we do this work every week
Rogersville, TNChurch Hill, TNKingsport, TNMount Carmel, TNSurgoinsville, TNBean Station, TNMorristown, TNGreeneville, TN
Don't see your town? We work across Hawkins County and the surrounding East Tennessee communities — call (423) 754-4353 and we will let you know.
Hours
Open 24/7
Based In
Rogersville, Tennessee
Established
Serving East Tennessee Since 2013
Payment Options
Cash · Check · Credit Card
One call.
Lights back
on.
Text or call Ryan directly. Clear answers, honest pricing, no upsells.